Wilo-DrainLift WS 40 Basic

- Lưu lượng max: 10 m3/h

- Cột áp max: 8m

Giá:Liên hệ

Thông tin sản phẩm

Design

Pump chamber made of plastic with integrated pump as concealed pumping station or floor-mounted lifting unit

Type key

Example:	Wilo-DrainLift WS 40E/TC40 (3~)-BV
WS	Synthetic pumps station
40	Pressure outlet of the system
E	E = single-pump system D = double-pump system
TC 40	Built-in pump
(3~)	Three-phase motor
BV	Non-return ball valve

Special features/product advantages

Pressure-tight sump for subterranean and aboveground installationFlexible due to free selection of inletsLarge tank volumeIncluding pipework, level control, switchgear and pump

Equipment/function Pump chamber complete ready for connection with pipework and pump.
Description/design The Wilo-DrainLift WS 40 Basic is an automatic lifting unit as a single-pump or double-pump system. The plastic shaft has integrated finning for increasing stiffness and anti-buoyancy, and also provides freely-definable inlets.The system can be installed in buildings as a lifting unit, as well as outside buildings like a traditional pump chamber in the ground.Inlet: DN 100/DN 150Ventilation: DN 70Maximum pressure in the pressure pipe: 1.5 bar.The submersible sewage pump Wilo-Drain TC 40 is preinstalled.
Scope of delivery Tank (for single or double pump system)Built-in pipeworkNon-return ball valveIncluding pumpLevel switchingSwitchgear (for three-phase pump or double-pump system)Cover with seal (can be walked on, supporting a weight up to 200 kg)Hole saw Ø 124 mm, inlet seal DN 100 (for pipe Ø 110 mm)1 PVC hose section Ø 50 mm with clamps for connection of a diaphragm hand pumpFixation material for floor fixationInstallation and operating instructions
Accessories Pump chamber extensionPump chamber coverClamp boltings